turbo 3-36

The bar feeder for bar diameters of 3 - 38 mm.

The turbo 3-36 operates on the principle known from the turbo-series, namely the two-step feed. By pivoting the pusher, this allows for a very compact and thus space-saving design.

Area of application:

Sliding or fixed headstock lathes with up to 38 mm nominal throughput gap, which process small and medium-sized diameter ranges.

Features

  • Short design based on a two-stage feed principle (swivelling pusher)
  • Fast, simple changing of the inserts for efficient adaptation of the guide channel to different material diameters
  • Maximum vibration damping from the use of plastic inserts in conjunction with a torsion-resistant aluminium support system.

Available installation situations

Einfach und komfortabel - die ERGOlogic Steuerung ...

Simple and convenient - the ERGOlogic control ...

Portable control panel

Modern touch control with generously sized 8.4“ screen makes an intuitive operating concept
possible for a faster learning phase. Integrated assistant function for guided set up for inexperienced users.

Efficient, practical handling ...

Efficient, practical handling ...

Installation position

The optional shifting device makes it possible to move the loading magazine up to 400 mm away from the lathe. This practical feature increases accessibility to the lathe for service technicians, e.g. when replacing spindle liners, or, when switching variable lathes from short-turning to long-turning mode, ensures the shortest distance between loading magazine and spindle stock at all times.

Effiziente und praxisorientierte Handhabung…

Efficient, practical handling...

Guide channel inserts

The guide channel inserts are quick easy to replace so that the channel diameter can be adapted to the optimum diameter range of the material bars to be processed.

Stabiles Design…

Stable design...

Machine support

The torsion-resistant machine support of extruded aluminium forms the solid basis for the loading magazine. It also holds the diameter-related inserts for the guide channel.

Stabiles Design…

Stable design...

Material bar grippers

The stable gripper design guarantees secure drawing in of the material bar and removal of the remnant piece.

Optimale Materialstangenführung…

Spindle liners

Spindle liners

On request FMB can also supply spindle liners to match a substantial number of lathe types; these enable the spindle opening to be optimally adapted to match the guide channel diameter.

Optimale Materialstangenführung…

Optimum material bar guidance...

Steady

The steady at the end of the guide channel takes the form of a flexible roller steady for the processing of round material bars. When processing round, square and hexagonal section materials the guide rollers can be replaced by appropriate material guides (guide jaws). This enables the steady to be set to the dimensions of the material bar, thus guaranteeing optimum guidance even of small-diameter bars in a larger guide channel.

Optimale Materialstangenführung …

Optimum material bar guidance ...

Synchronizing device

When using a moving spindle stock (e.g. in sliding headstock mode), the synchronizing device uses a coupling system to couple the bar feed device of the loading magazine mechanically to the spindle stock, thus ensuring synchronisation with the movement of the pusher. As an option, the position during this movement can also be monitored by a sensor to prevent any possible collisions, e.g. when switching from fixed headstock to sliding headstock mode.

Optimale Materialstangenführung …

Optimum material bar guidance ...

Telescopic tube

Telescopic tubes are used to bridge the gap when fitting a bar loading magazine to a lathe with a sliding spindle stock. FMB offers an optional package to suit each type of lathe, to ensure secure protection of the rotating bar and the best possible guidance.

Optimale Materialstangenführung …

Optimum material bar guidance ...

Spindle stock steady

In addition to the use of a telescopic tube, FMB offers a moving steady for lathes with large travel distances along the Z axis and long spindles. This is linked to the spindle stock, thus offering an additional support point for the material bar in order to reduce the free length between the steady and the collet in the lathe. It reduces vibrations in the material bar and has a positive effect on the production quality of the parts.

Technical data

Bar length 1)

2200 mm

3200 mm

4200 mm

6200 mm

Bar diameter

3 - 38 mm

3 - 38 mm

3 - 38 mm

3 - 38 mm

Loading capacity

230 mm

230 mm

230 mm

230 mm

Remnant piece length (max)

450 mm

450 mm

450 mm

450 mm

Loading time (approx.) 2)

-

20 s

-

-

Feed speed

0-1000 mm/s

0-1000 mm/s

0-1000 mm/s

0-1000 mm/s

Return speed

0-2000 mm/s

0-2000 mm/s

0-2000 mm/s

0-2000 mm/s

Power requirement

2,0 kW

2,0 kW

2,0 kW

2,0 kW

Compressed air connection

0,6 / 6 bar MPa

0,6 / 6 bar MPa

0,6 / 6 bar MPa

0,6 / 6 bar MPa

Weight without oil

550 kg

750 kg

1000 kg

1500 kg

  • 1) Special lengths on request
  • 2) According to FMB standard cycle

Your privacy on FMB-MACHINERY.COM

FMB Maschinenbaugesellschaft mbH & Co. KG uses cookies on this website to ensure various functions. Information regarding the used cookies and about FMB can be found in our privacy policy or in the imprint respectively.

Cookie-settings

 

Mandatory cookies to ensure the function of the website.

 

Tracking cookies and marketing cookies help us to improve the surf experience and to show more relevant content to the visitors.